Belhasa Stones & Concrete Flooring

Stamped Concrete is a flooring concrete that is patterned and/or textured to resemble different design on floor like brick, slate, flagstone, tile, wood, and more.

An Exposed aggregate concrete floor is structured by casting concrete and then removing the outer layer of cement paste to uncover aggregate.

Belcrete OL40 is a cement based concrete overlay product which is used for concrete surfaces, It is thin concrete overlay product which can be used on existing or new concrete or tarmac to make beautiful & attractive driveways, paths, car parks.

Resin Bonded aggregate or Resin Bonded gravel system can be overlaid on existing or new concrete or tarmac to make beautiful & attractive driveways, paths, car parks or any lightly trafficked area.

Brick veneer is a method of construction where a property of either a wooden or steel frame is concealed with a single layer of bricks as the exterior layer.

Rough, broken stone suitable for rustic masonry, most commonly limestone or sandstone; usually set with the elongate dimension exposed horizontally.

High Gloss, Solvent-Based Acrylic Sealer

Belcrete WBS is a clear, water-based silane/siloxane sealer for protecting a wide variety of vertical and horizontal surfaces.

Belcrete epoxy resin is a two components system, with good flowing property, low viscosity, bright in surface, it can be cured at room temperature or high temperature. Easy to be mixed with construction materials like sand, fillers, stone, pebbles, quartz, etc..

Concrete color Hardener is ready to use, nonmetallic dry shake hardener. It is formulated to be easily integrated into the surface of freshly placed concrete.

Floor Topping materials are a colored cementitious topping containing different aggregates such as crushed marble, glass, or silica aggregates , has different thickness and applied on both methods dry shake or overlay topping .

Belhasa Crack Filler is a single component & polymer modified cementing repair mortar.

BondCrete is a premium quality, single component, polymer modified, cement-based Slurry with excellent bonding properties , used as a bonding layer between old and new concrete surfaces and for bedding and bonding overlays to existing surfaces.it's suitable for interior as well as exterior applications and for on-grade and above-grade applications.

Belhasa Special Tile Glue is a cement powder based adhesive formulated to be mixed with water.

It is high performance cement based per-mixed non-shrink grout, used for filling joints, in wet and dry areas.

FoamFix is a polymer modified, fiber-reinforced, cementitious base, leveling, and adhesive compound for vertical applications.

Belhasa Colored Plaster is a new innovation and enables internal coloring of the cement plaster.