simple web builder

Belhasa Adhesives

Tile Glue | Marble Glue

Belhasa Tile Glue

Belhasa Tile & Marble Glue

Belhasa Special Tile Glue is a cement powder based adhesive formulated to be mixed with water. A thick bed adhesive for bedding and fixing ceramic tiles to firm masonry surfaces. It contains high quality white cement-filler-fine graded sand, chemical additives high organic polymer content & others

Features

• Excellent adhesion
• Water Resistant
• Improved workability & heat resistant
• Chemical & oil resistant
• Economical contract packing
• Long open time, slip resistant

Uses

• Fixing of ceramic floor & wall tiles, swimming pool tiles & decorative stone cladding & marbles
• Interior & Exterior use

PRPARATION

Ensure that the surface to be covered is clean & free of foreign matter


MIXING

• One unit of Belhasa Special Tile glue should be mixed thoroughly  (we recommend mechanical mixed for this purpose) with approximately 25% water by weight & should be allowed to stand for 5-10 minutes.

• After maturing stir again, no further water should be added

• Mixed mortar should be used within 45 minutes


APPLICATION

• Apply to depth of 3-5 mm covering only 1 sq. meter

• Ensure that at least 75% of each is in contact with adhesives

• Do not spread more than 1 sq. meter at a time

• Leave for at least 24 hours before grouting

• To ensure even spacing, tile spacer of the required thickness are recommended 

• Clean tools and tile work with water while mortar is fresh


GROUTING

Carefully attention must be paid to the grouting operation; otherwise  satisfactory job will be seriously impaired. Grouting should not be used for at least 2 days after completion of tiling. Neat cement should not be used as grouting material. Use Belhasa Grout for better results 


PACKAGING

Belhasa Special Tile glue is packed in 20kg bags. It can be custom packaged to suit specific job requirements


STORAGE

Material should be stored in a dry covered area protected from elements. Unopened bags have a shelf of 12 months 

SAFETY PROCEDURES

Wear safety such as rubber gloves, dust mask and safety glasses used to handle conventional cement based products should be worn. In case of contact with eyes, rinse with plenty of clean water and seek medical advice accordingly. MSDS are available upon request

TECHNICAL ASSISTANCE 

For advice on how to use Belhasa Tile glue No. 1 product consult your nearest Belhasa Stones & Concrete Flooring technical office 

Address

Industrial Area-18, Maliha Road,
Sharjah-UAE

Contacts

Email:   info@belhasastones.com
Tel:        +971 6 5443336
Mobile: +971 55 532 8666
Fax:       +971 6 5443337